The SP215 is an elegant and slim self-powered sublow system. The cabinet is constructed of a rigid, multilayer, cross grain birch plywood. Additionally braced with multiple reinforcement ribs and finished with a sturdy nano-armor™ coating.
Sound Projects SALC speaker management electronics and a proprietary 2500W CoolClass-D™ amplifier section power the two longstroke 15-inch drivers. This combination boasts an impressive 142dB SPL augmenting the low-end response of the full range and high/mid systems down to 30Hz, the deep sub you can feel.
The SP215 is cosmetically interchangeable with all SPX systems and will effortlessly add a tight kick to any rock concert as well as a fat old moog groove to a dance party.
Acoustical specifications | |
---|---|
Drivers | 2 x 15” High Power, low distortion, long excursion design. Double, impregnated spider and ventilated coil airgap for reduced power compression. |
Freq. Reponse | 30-60Hz/FR switchable: Sub Mode/FR (ext. LP filter) |
Max. peak SPL @ 1m |
142dB
Peak level at 1M under half space conditions using pink noise with crest factor 4 (12dB) |
Coverage angle | Omni-directional |
Electrical specifications |
|
Amplifier(s) | CCD™ technology |
Output |
2500W sine (SALC limited)
Specified at 4Ω |
Filter subsonic | 30Hz, 2nd order |
Low pass 4th order |
60Hz / Full range (switchable)
Fixed filter on request |
Input impedance | 20 kOhms balanced, 10 kOhms unbalanced |
Output impedance | Hard-wired to input |
Main voltage | 230V (other on request) |
Mains frequency | 50 / 60 Hz |
Idle | < 50VA |
Full load | < 3000VA. DALC limited Ref. to continuous pink noise signal (12 dB crest factor within the specified range) |
Protection | S.A.L.C. (Single Audio Logic Control) |
Additional descriptive data |
|
Cabinet construction | Cross grain laminated multiplex |
Finish | Nano-armor™ coating |
Weight (in kg) | 72 |
Width (in mm) | 450 |
Height (in mm) | 1200 |
Depth (in mm) | 600 |
Depth with wheels (in mm) | 730 |
Rigging points | M20 polemount |
Audio connectors | IEC XLR-3 in/out |
Main connectors | Powercon in, powercon out |
Max operating temp. | -10 to 40 C ambient |